Close-range drone inspection of a wind turbine blade
Free guide · For wind asset managers

The wind turbine blade inspection checklist.

A practical, field-tested checklist covering pre-flight planning, blade surface capture, defect types to flag, thermal inspection and reporting deliverables. Use it to scope inspections, brief teams and benchmark your current process.

  • 5 inspection phases, 25+ checkpoints
  • Defect severity grading guidance
  • Thermal inspection best practice
  • Reporting deliverables checklist

Get the free checklist

Instant download · No spam · Unsubscribe anytime

By downloading, you agree to be contacted about wind inspection services. We won't share your details.

Inside the checklist

Five phases of a complete blade inspection.

Here's a preview of what's covered. Download the full guide for the complete 25+ checkpoint list.

1. Pre-inspection planning

  • Confirm turbine make, model and blade serial numbers
  • Review maintenance history and known defects
  • Check NOTAMs, airspace restrictions and weather window
  • Coordinate site access and turbine shutdown if required
  • Define inspection scope: visual, thermal, structural

2. Blade surface capture

  • Leading edge — full span, both sides
  • Trailing edge — full span, both sides
  • Pressure side (suction face) — tip to root
  • Suction side (pressure face) — tip to root
  • Root transition and pitch bearing area
  • Tip and tip-brake / lightning receptor

3. Defect types to flag

  • Leading-edge erosion (LEE) — grade by severity
  • Surface cracks, gelcoat crazing and delamination
  • Bond-line failures and trailing-edge splits
  • Lightning strike damage and receptor condition
  • Foreign object debris (FOD) impact
  • Internal delamination (thermal anomaly)

4. Thermal inspection

  • Capture under load where possible for thermal contrast
  • Map temperature anomalies against RGB imagery
  • Flag suspect delamination and moisture ingress
  • Record ambient conditions (temp, wind, irradiance)

5. Reporting & deliverables

  • Per-blade defect register with location and severity
  • Geo-referenced imagery with defect annotations
  • Severity scoring and recommended actions
  • Trend comparison against previous inspections
  • Engineer-reviewed findings before delivery

Want it handled for you?

We inspect wind turbine blades across the UK with CAA-licensed drones, thermal imaging and AI-assisted defect detection — delivered as a prioritised report in 24 hours.

Request an inspection quote